 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| !Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 EMI Suppression Filters (EMIFILr) for AC Power Lines Murata Manufacturing Co., Ltd. Cat.No.C09E-11 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 CONTENTS EMIFILr in this catalog is the trademark of Murata Manufacturing Co., Ltd. 1 Part Numbering Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines 1 Common Mode Choke Coil FKOB Series PLA10 Series Standard Winding Type PLA10 Series Sectional Winding Type PLA10 Series (Safety Standard Recognized) Standard Winding Type PLA10 Series (Safety Standard Recognized) Sectional Winding Type PLH10 Series PLH10 Series (Safety Standard Recognized) 2 Hybrid Choke Coil PLY10 Series Standard Winding Type PLY10 Series Sectional Winding Type PLY10 Series (Safety Standard Recognized) Standard Winding Type PLY10 Series (Safety Standard Recognized) Sectional Winding Type PLY17 Series A Type PLY17 Series B Type PLY17 Series (Safety Standard Recognized) A Type PLY17 Series (Safety Standard Recognized) B Type Noise Suppression Effect of PLY10 Series 2 3 5 5 6 6 8 8 10 11 12 12 12 14 14 16 16 18 18 20 21 22 2 !Caution /Notice Packaging Recycled Paper !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 o Part Numbering AC Line Filters (Part Number) PL q qProduct ID Product ID PL wType Code A H Y eApplications Code 10 17 rStructure Code A B tFeatures Code S N Features Safety Recognized General Use oLead Dimensions Code 2 !0Packaging Code B M Packaging Bulk Magazine Package Series All series Lead Dimensions 3.5mm Structure Core Vertical Type Core Horizontal Type Applications for AC Line Type AC Standard Type AC High-frequency Type AC Hybrid Choke Coils Type Common Mode Choke Coils A 10 A S 152 y 2R0 u R 2 B yInductance Expressed by three figures. The unit is micro-henry (H). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. If inductance is less than 0.1 H, the inductance code is expressed by a combination of two figures and capital letter "N", and the unit of inductance is nano-henry (nH). The capital letter "N" indicates the unit of "nH", and also expresses a decimal point. In this case, all figures are significant digits. wert i o !0 uRated Current Expressed by three figures. The unit is in amperes (A). A decimal point is expressed by the capital letter "R". In this case, all figures are significant digits. iWinding Mode Code A B D R P Winding Mode Parallel Winding Type Parallel Winding Type (High Performance Type) Sectional Winding Type Standard Type Single Layer Winding Type * Please contact us for FKOB series. 2 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines EMI (Electro Magnetic Interference) suppression filter for AC power lines eliminate noise entering equipment from commercial power lines or noise generated from electronic equipment. Common mode chokes, line bypass capacitors, across the line capacitors are generally used as AC EMI suppression filter device. In suppressing common mode noise, common mode chokes are most important devices. Because the characteristics of common mode chokes influences performance of total filter block MURATA provides two types of common mode chokes. (Standard type, High frequency type) Hybrid choke coil is high performance EMI suppression device which can suppress both common mode noise and differential mode noise at the same time. It is effective in AC power supplies with active device for higher harmonic countermeasure, which tend to emit relatively higher differential mode noise. s Classification of EMI Suppression Filter for AC Power Lines Product Name Common Mode Choke Coil Appearance 10k Standard Type Effective Frequency Range (Hz) 100k 1M 10M 100M 1G Application Suppression of general common mode noise PLA10 FKOB High Frequency Type Suppression of common mode noise contains high frequency noise above 10MHz PLH10 Hybrid Choke Coil Suppression of conduction noise in AC power line with active device for higher harmonic countermeasure. Suppression of AC power line noise which contains both PLY10 common mode noise and differential mode noise. Hybrid Choke Coil For AC power supply, AC adaptor. Set for low profile equipment. PLY17 3 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines s Common Mode Choke Coil Standard Winding and Sectional Winding Standard Winding End of Winding 36 19 18 1 35 20 17 2 34 21 16 3 33 22 15 4 32 23 14 5 31 24 13 6 30 25 12 7 29 26 11 8 28 27 10 9 Standard Winding Large inductance is available Highly Efficient in Low Frequency Sectional Winding Excellent performance in high frequency Stray capacity between windings is low 0 Beginning of Winding High-frequency noise can pass through the Filter easily because both edges of coils are close as shown above Sectional Winding 16 9 8 1 15 10 7 2 14 11 6 3 13 12 5 4 End of Winding Insertion Loss (dB) 32 25 24 17 31 26 23 18 30 27 22 19 29 28 21 20 20 (Standard Winding) 40 (Sectional Winding) 60 Beginning of Winding High-frequency noise can hardly pass through the Filter because both edges of coil are not close as shown above 80 0.01 0.1 1 Frequency (MHz) 10 100 s Noise Measures for Switching Power Supply Common Mode Choke Coil suppresses Common Mode Noise Line Bypass Capacitor (Y Capacitor) suppresses Common Mode Noise Differential Mode Choke Coil suppresses Differential Mode Noise Noise are generated from Switching Power Supply Common Mode Noise Differential Mode Noise Switching Power Supply Load PLA10/PLH10 Across the Line Capacitor (X Capacitor) suppresses Differential Mode Noise Differential Mode Choke Coil suppresses Differential Mode Noise Across the Line Capacitor (X Capacitor) suppresses Differential Mode Noise 4 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 EMI Suppression Filters (EMIFILr) for AC Power Lines Common Mode Choke Coil FKOB Series The FKOB series is compact size AC common mode choke coil which uses troidal type ferrite core. Its broad band frequency characteristic enables simple filter composition in relative low noise equipments. 4 3 2 o23 max. 100.5 17 max. 1 1 102 FKOB160MH02/25/23/26/24 (in mm) 4 o23 max. 100.5 17 max. 1 4.51 FKOB160MH06/13/14/16/15 (in mm) Part Number FKOB160MH02 FKOB160MH06 FKOB160MH13 FKOB160MH25 FKOB160MH14 FKOB160MH23 FKOB160MH16 FKOB160MH26 FKOB160MH15 FKOB160MH24 Common Mode Inductance (min.) (H) 250 250 600 600 800 800 1000 1000 1500 1500 Rated Current (A) 2.5 2.5 2.5 2.5 2.5 2.5 1.5 1.5 1.5 1.5 Rated Voltage (V) 250 250 250 250 250 250 250 250 250 250 Insulation Resistance (min.) (M ohm) 100 100 100 100 100 100 100 100 100 100 Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -20C to 95C Winding Temperature Rise (at Rated Current) (max.): 35K s Equivalent Circuit Diagram s Insertion Loss-Frequency Characteristics 0 10 02, 06 Insertion Loss (dB) 20 30 16, 26 40 50 60 70 0.1 0.5 1 5 10 50 100 15, 24 13, 14, 23, 25 (1) N1 (2) N1 : N2 = 1 : 1 (4) N2 (3) Frequency (MHz) 130.5 2 80.5 3 5 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 1 PLA10 Series The PLA10 series is a compact size AC common mode choke coil. It can obtain a high inductance value in spite of its compact size. 18 max. 16 max. s Features 1. Compact and light weight 2. Low profile in vertical core layout 3. Both a standard winding type and a sectional winding type for higher frequency noise are available. 3.51 17.5 max. o0.9 max. (4) [(1)] 130.5 100.5 (3) [(2)] (in mm) Standard Winding Type (1) [(2)] (4) [(3)] 18 max. 16 max. 3.51 17.5 max. o0.9 max. 100.5 (4) [(1)] (3) [(2)] (in mm) 130.5 Sectional Winding Type (1) [(2)] (4) [(3)] o Standard Winding Type Part Number PLA10AN1522R0R2 PLA10AN1821R7R2 PLA10AN2221R5R2 PLA10AN3021R3R2 PLA10AN3521R2R2 PLA10AN5521R0R2 PLA10AN7420R8R2 PLA10AN1030R7R2 PLA10AN1230R6R2 PLA10AN2030R5R2 PLA10AN3030R4R2 PLA10AN4330R3R2 Common Mode Inductance (min.) (mH) 1.5 1.8 2.2 3.0 3.5 5.5 7.4 10.0 12.0 20.0 30.0 43.0 Rated Current (A) 2.0 1.7 1.5 1.3 1.2 1.0 0.8 0.7 0.6 0.5 0.4 0.3 Rated Voltage (V) 300 300 300 300 300 300 300 300 300 300 300 300 Insulation Resistance (min.) (M ohm) 100 100 100 100 100 100 100 100 100 100 100 100 Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25C to 120C Winding Temperature Rise (at Rated Current) (max.): 60K o Sectional Winding Type Part Number PLA10AN9012R0D2 PLA10AN1321R7D2 PLA10AN1821R5D2 PLA10AN2021R3D2 PLA10AN3621R0D2 PLA10AN7720R7D2 PLA10AN1330R5D2 PLA10AN2230R4D2 PLA10AN3630R3D2 Common Mode Inductance (min.) (mH) 0.9 1.3 1.8 2.0 3.6 7.7 13.0 22.0 36.0 Rated Current (A) 2.0 1.7 1.5 1.3 1.0 0.7 0.5 0.4 0.3 Rated Voltage (V) 300 300 300 300 300 300 300 300 300 Insulation Resistance (min.) (M ohm) 100 100 100 100 100 100 100 100 100 Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25C to 120C Winding Temperature Rise (at Rated Current) (max.): 60K 6 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 s Equivalent Circuit Diagram 1 (1) N1 (2) N1 : N2 = 1 : 1 (4) N2 (3) s Insertion Loss-Frequency Characteristics Standard Winding Type 0 PLA10AN1522R0R2 PLA10AN1821R7R2 PLA10AN2221R5R2 PLA10AN3021R3R2 PLA10AN3521R2R2 PLA10AN5521R0R2 0 PLA10AN9012R0D2 PLA10AN1321R7D2 PLA10AN1821R5D2 PLA10AN2021R3D2 Sectional Winding Type 20 Insertion Loss (dB) 20 Insertion Loss (dB) 40 PLA10AN7420R8R2 PLA10AN1030R7R2 PLA10AN1230R6R2 PLA10AN2030R5R2 PLA10AN3030R4R2 PLA10AN4330R3R2 0.1 1 Frequency (MHz) 10 100 40 PLA10AN3621R0D2 PLA10AN7720R7D2 PLA10AN1330R5D2 PLA10AN2230R4D2 PLA10AN3630R3D2 0.1 1 Frequency (MHz) 10 100 60 60 80 0.01 80 0.01 7 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 1 PLA10 Series (Safety Standard Recognized) s Features 1. Compact and light weight 2. Low profile in vertical core layout 3. Both a standard winding type and a sectional winding type for higher frequency noise are available. 4. Safety standards: EN60065 130.5 18 max. 16 max. 3.51 17.5 max. o0.9 max. (4) [(1)] 100.5 (3) [(2)] (in mm) s Applications Noise suppression of AC power lines Standard Winding Type (1) [(2)] (4) [(3)] 18 max. 16 max. 3.51 17.5 max. o0.9 max. 100.5 (4) [(1)] (3) [(2)] (in mm) 130.5 Sectional Winding Type (1) [(2)] (4) [(3)] o Standard Winding Type Part Number PLA10AS1522R0R2 PLA10AS1821R7R2 PLA10AS2221R5R2 PLA10AS3021R3R2 PLA10AS3521R2R2 PLA10AS5521R0R2 PLA10AS7420R8R2 PLA10AS1030R7R2 PLA10AS1230R6R2 PLA10AS2030R5R2 PLA10AS3030R4R2 PLA10AS4330R3R2 Common Mode Inductance (min.) (mH) 1.5 1.8 2.2 3.0 3.5 5.5 7.4 10.0 12.0 20.0 30.0 43.0 Rated Current (A) 2.0 1.7 1.5 1.3 1.2 1.0 0.8 0.7 0.6 0.5 0.4 0.3 Winding Temperature Rise (at Rated Current) (max.): 60K Rated Voltage (V) 250 250 250 250 250 250 250 250 250 250 250 250 Insulation Resistance (min.) (M ohm) 100 100 100 100 100 100 100 100 100 100 100 100 Operating Temperature Range : -25C to 60C o Sectional Winding Type Part Number PLA10AS9012R0D2 PLA10AS1321R7D2 PLA10AS1821R5D2 PLA10AS2021R3D2 PLA10AS3621R0D2 PLA10AS7720R7D2 PLA10AS1330R5D2 PLA10AS2230R4D2 PLA10AS3630R3D2 Common Mode Inductance (min.) (mH) 0.9 1.3 1.8 2.0 3.6 7.7 13.0 22.0 36.0 Rated Current (A) 2.0 1.7 1.5 1.3 1.0 0.7 0.5 0.4 0.3 Winding Temperature Rise (at Rated Current) (max.): 60K Rated Voltage (V) 250 250 250 250 250 250 250 250 250 Insulation Resistance (min.) (M ohm) 100 100 100 100 100 100 100 100 100 Operating Temperature Range : -25C to 60C 8 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 s Equivalent Circuit Diagram 1 (1) N1 (2) N1 : N2 = 1 : 1 (4) N2 (3) s Insertion Loss-Frequency Characteristics Standard Winding Type 0 PLA10AS1522R0R2 PLA10AS1821R7R2 PLA10AS2221R5R2 PLA10AS3021R3R2 PLA10AS3521R2R2 PLA10AS5521R0R2 0 PLA10AS9012R0D2 PLA10AS1321R7D2 PLA10AS1821R5D2 PLA10AS2021R3D2 PLA10AS3621R0D2 PLA10AS7720R7D2 Sectional Winding Type 20 Insertion Loss (dB) 20 Insertion Loss (dB) 40 PLA10AS7420R8R2 PLA10AS1030R7R2 PLA10AS1230R6R2 PLA10AS2030R5R2 PLA10AS3030R4R2 PLA10AS4330R3R2 0.1 1 Frequency (MHz) 10 100 40 60 60 PLA10AS1330R5D2 PLA10AS2230R4D2 PLA10AS3630R3D2 80 0.01 0.1 1 Frequency (MHz) 10 100 80 0.01 9 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 1 PLH10 Series The PLH10 series is a common mode choke coil for high frequency use. The same dimensions as the PLA10 series enables flexible design. 18 max. 16 max. s Features 1. High performance in high frequency range 2. Low profile in vertical core layout 3. Compact and light weight (1) [(2)] 17.5 max. o0.9 max. 3.51 130.5 (4) [(3)] 100.5 (4) [(1)] (3) [(2)] (in mm) Part Number PLH10AN7003R6P2 PLH10AN1112R6P2 PLH10AN1612R1P2 PLH10AN2211R5P2 PLH10AN2911R2P2 PLH10AN3711R0P2 Common Mode Inductance (min.) (H) 70 110 160 220 290 370 Rated Current (A) 3.6 2.6 2.1 1.5 1.2 1.0 Rated Voltage (V) 300 300 300 300 300 300 Insulation Resistance (min.) (M ohm) 100 100 100 100 100 100 Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25C to 120C Winding Temperature Rise (at Rated Current) (max.): 60K s Equivalent Circuit Diagram s Insertion Loss-Frequency Characteristics 0 PLH10AN7003R6P2 PLH10AN1112R6P2 PLH10AN1612R1P2 10 (1) (2) Insertion Loss (dB) N1 20 N1 : N2 = 1 : 1 30 PLH10AN2211R5P2 PLH10AN2911R2P2 PLH10AN3711R0P2 (4) N2 (3) 40 50 0.1 1.0 10 Frequency (MHz) 100 1000 10 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 PLH10 Series (Safety Standard Recognized) s Features 1. High performance in high frequency range 2. Low profile in vertical core layout 3. Compact and light weight 4. Safety standards: EN60065 18 max. 16 max. 1 s Applications Suppressing radiation noise in switching power supply and inverter (AC-AC converter) 3.51 130.5 (1) [(2)] (4) [(3)] 17.5 max. o0.9 max. 100.5 (4) [(1)] (3) [(2)] (in mm) Part Number PLH10AS7003R6P2 PLH10AS1112R6P2 PLH10AS1612R1P2 PLH10AS2211R5P2 PLH10AS2911R2P2 PLH10AS3711R0P2 Common Mode Inductance (min.) (H) 70 110 160 220 290 370 Rated Current (A) 3.6 2.6 2.1 1.5 1.2 1.0 Rated Voltage (V) 250 250 250 250 250 250 Insulation Resistance (min.) (M ohm) 100 100 100 100 100 100 Operating Temperature Range : -25C to 60C Winding Temperature Rise (at Rated Current) (max.): 60K s Equivalent Circuit Diagram s Insertion Loss-Frequency Characteristics 0 PLH10AS7003R6P2 PLH10AS1112R6P2 PLH10AS1612R1P2 10 (1) (2) Insertion Loss (dB) N1 20 N1 : N2 = 1 : 1 30 PLH10AS2211R5P2 PLH10AS2911R2P2 PLH10AS3711R0P2 (4) N2 (3) 40 50 0.1 1.0 10 Frequency (MHz) 100 1000 11 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 EMI Suppression Filters (EMIFILr) for AC Power Lines Hybrid Choke Coil 2 PLY10 Series The PLY10 is a compact and high performance hybrid choke coil which can handle differential mode noise caused by the harmonics currents regulation circuit as well as common mode noise. It can handle noise problems much more compactly than a combination of a conventional common mode choke coil and a differential mode choke coil. 18 max. 16 max. 3.51 17.5 max. o0.9 max. 100.5 (4) [(1)] (3) [(2)] (in mm) 130.5 s Features 1. PLY10 has both functions of a common mode choke coil and a differential mode choke coil in its compact body. 2. Low profile in vertical core layout 3. PLY10 has the same pin layout as a general type common mode choke coil which enables it to replace conventional components. 4. Both a standard winding type and a sectional winding type for higher frequency noise are available. Standard Winding Type (1) [(2)] (4) [(3)] 18 max. 16 max. 3.51 s EMI Problem for harmonics currents regulation There are some methods meet harmonics currents regulations (IEC1000-3, EN60555-2) such as an active filter type and one converter type. However, they cause new EMI problems of differential mode noise because they use active components. For that reason, additional filter components to meet differential mode noise must be applied. 130.5 17.5 max. o0.9 max. 100.5 (4) [(1)] (3) [(2)] (in mm) Sectional Winding Type (1) [(2)] (4) [(3)] o Standard Winding Type Part Number PLY10AN9012R0R2 PLY10AN1121R8R2 PLY10AN1521R6R2 PLY10AN2121R4R2 PLY10AN2821R2R2 PLY10AN4321R0R2 PLY10AN6220R8R2 PLY10AN8720R7R2 PLY10AN9920R6R2 PLY10AN1430R5R2 Common Mode Inductance (min.) (mH) 0.9 1.1 1.5 2.1 2.8 4.3 6.2 8.7 9.9 14.0 Normal Mode Inductance (min.) (H) 65 90 110 150 190 300 400 530 690 1000 Rated Current (A) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.7 0.6 0.5 Rated Voltage (Vac) 300 300 300 300 300 300 300 300 300 300 Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25C to 120C Winding Temperature Rise (at Rated Current) (max.): 60K o Sectional Winding Type Part Number PLY10AN7012R0D2 PLY10AN1121R7D2 PLY10AN1421R4D2 Common Mode Inductance (min.) (mH) 0.7 1.1 1.4 Normal Mode Inductance (min.) (H) 50 65 110 Rated Current (A) 2.0 1.7 1.4 Rated Voltage (Vac) 300 300 300 Continued on the following page. 12 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 Continued from the preceding page. Part Number PLY10AN2321R2D2 PLY10AN3521R0D2 PLY10AN4420R8D2 PLY10AN8720R7D2 PLY10AN9720R6D2 PLY10AN1130R5D2 PLY10AN2430R4D2 Common Mode Inductance (min.) (mH) 2.3 3.5 4.4 8.7 9.7 11.0 24.0 Normal Mode Inductance (min.) (H) 160 240 320 500 670 840 1800 Rated Current (A) 1.2 1.0 0.8 0.7 0.6 0.5 0.4 Rated Voltage (Vac) 300 300 300 300 300 300 300 2 Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25C to 120C Winding Temperature Rise (at Rated Current) (max.): 60K s Equivalent Circuit Diagram Differential Mode Inductor (1) (2) (4) Common Mode Inductor (3) s Common Mode Insertion Loss-Frequency Characteristics Standard Winding Type 0 PLY10AN9012R0R2 PLY10AN1121R8R2 PLY10AN1521R6R2 PLY10AN2121R4R2 Insertion Loss (dB) 0 PLY10AN7012R0D2 PLY10AN1121R7D2 PLY10AN1421R4D2 PLY10AN2321R2D2 PLY10AN3521R0D2 Sectional Winding Type 20 Insertion Loss (dB) 20 40 PLY10AN2821R2R2 PLY10AN4321R0R2 PLY10AN6220R8R2 PLY10AN8720R7R2 PLY10AN9920R6R2 PLY10AN1430R5R2 0.1 1 Frequency (MHz) 10 100 40 60 60 80 0.01 80 0.01 PLY10AN4420R8D2 PLY10AN8720R7D2 PLY10AN9720R6D2 PLY10AN1130R5D2 PLY10AN2430R4D2 0.1 1 Frequency (MHz) 10 100 s Differential Mode Insertion Loss-Frequency Characteristics Standard Winding Type 0 PLY10AN9012R0R2 PLY10AN1121R8R2 PLY10AN1521R6R2 20 Insertion Loss (dB) Insertion Loss (dB) 20 0 PLY10AN7012R0D2 PLY10AN1121R7D2 PLY10AN1421R4D2 PLY10AN2321R2D2 Sectional Winding Type 40 PLY10AN2121R4R2 PLY10AN2821R2R2 PLY10AN4321R0R2 PLY10AN6220R8R2 PLY10AN8720R7R2 PLY10AN9920R6R2 PLY10AN1430R5R2 0.1 1 Frequency (MHz) 10 100 40 60 60 PLY10AN3521R0D2 PLY10AN4420R8D2 PLY10AN8720R7D2 PLY10AN9720R6D2 PLY10AN1130R5D2 PLY10AN2430R4D2 80 0.01 80 0.01 0.1 1 Frequency (MHz) 10 100 13 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 PLY10 Series (Safey Standard Recognized) The PLY10 is a compact and high performance hybrid choke coil which can handle differential mode noise caused by the harmonics currents regulation circuit as well as common mode noise. It can handle noise problems much more compactly than a combination of a conventional common mode choke coil and a differential mode choke coil. 18 max. 16 max. 2 3.51 17.5 max. o0.9 max. 100.5 (4) [(1)] (3) [(2)] (in mm) 130.5 s Features 1. PLY10 has both functions of a common mode choke coil and a differential mode choke coil in its compact body. 2. Low profile in vertical core layout 3. PLY10 has the same pin layout as a general type common mode choke coil which enables it to replace conventional components. 4. Safety standards: EN60065 Standard Winding Type (1) [(2)] (4) [(3)] 18 max. 16 max. s EMI Problem for harmonics currents regulation There are some methods meet harmonics currents regulations (IEC1000-3, EN60555-2) such as an active filter type and one converter type. However, they cause new EMI problems of differential mode noise because they use active components. For that reason, additional filter components to meet differential mode noise must be applied. 3.51 o0.9 max. 100.5 (4) [(1)] (3) [(2)] (in mm) 130.5 Sectional Winding Type (1) [(2)] (4) [(3)] o Standard Winding Type Part Number PLY10AS9012R0R2 PLY10AS1121R8R2 PLY10AS1521R6R2 PLY10AS2121R4R2 PLY10AS2821R2R2 PLY10AS4321R0R2 PLY10AS6220R8R2 PLY10AS8720R7R2 PLY10AS9920R6R2 PLY10AS1430R5R2 Common Mode Inductance (min.) (mH) 0.9 1.1 1.5 2.1 2.8 4.3 6.2 8.7 9.9 14.0 Normal Mode Inductance (min.) (H) 65 90 110 150 190 300 400 530 690 1000 Rated Current (A) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.7 0.6 0.5 Rated Voltage (Vac) 300 300 300 300 300 300 300 300 300 300 Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25C to 120C Winding Temperature Rise (at Rated Current) (max.): 60K o Sectional Winding Type Part Number PLY10AS7012R0D2 PLY10AS1121R7D2 PLY10AS1421R4D2 PLY10AS2321R2D2 PLY10AS3521R0D2 PLY10AS4420R8D2 PLY10AS8720R7D2 PLY10AS9720R6D2 PLY10AS1130R5D2 PLY10AS2430R4D2 Common Mode Inductance (min.) (mH) 0.7 1.1 1.4 2.3 3.5 4.4 8.7 9.7 11.0 24.0 Normal Mode Inductance (min.) (H) 50 65 110 160 240 320 500 670 840 1800 Rated Current (A) 2.0 1.7 1.4 1.2 1.0 0.8 0.7 0.6 0.5 0.4 Rated Voltage (Vac) 300 300 300 300 300 300 300 300 300 300 Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25C to 120C Winding Temperature Rise (at Rated Current) (max.): 60K 14 17.5 max. !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 s Equivalent Circuit Diagram Differential Mode Inductor (1) (2) 2 (4) Common Mode Inductor (3) s Common Mode Insertion Loss-Frequency Characteristics Standard Winding Type 0 PLY10AS9012R0R2 PLY10AS1121R8R2 PLY10AS1521R6R2 PLY10AS2121R4R2 Insertion Loss (dB) 0 Sectional Winding Type 20 Insertion Loss (dB) 20 PLY10AS7012R0D2 PLY10AS1121R7D2 PLY10AS1421R4D2 PLY10AS2321R2D2 PLY10AS3521R0D2 PLY10AS4420R8D2 40 PLY10AS2821R2R2 PLY10AS4321R0R2 PLY10AS6220R8R2 PLY10AS8720R7R2 PLY10AS9920R6R2 PLY10AS1430R5R2 0.1 1 Frequency (MHz) 10 100 40 60 80 0.01 60 PLY10AS8720R7D2 PLY10AS9720R6D2 PLY10AS1130R5D2 PLY10AS2430R4D2 80 0.01 0.1 1 Frequency (MHz) 10 100 s Differential Mode Insertion Loss-Frequency Characteristics Standard Winding Type 0 PLY10AS9012R0R2 PLY10AS1121R8R2 PLY10AS1521R6R2 20 Insertion Loss (dB) Insertion Loss (dB) 20 0 PLY10AS7012R0D2 PLY10AS1121R7D2 PLY10AS1421R4D2 Sectional Winding Type 40 PLY10AS2121R4R2 PLY10AS2821R2R2 PLY10AS4321R0R2 PLY10AS6220R8R2 PLY10AS8720R7R2 PLY10AS9920R6R2 PLY10AS1430R5R2 0.1 1 Frequency (MHz) 10 100 40 60 60 PLY10AS2321R2D2 PLY10AS3521R0D2 PLY10AS4420R8D2 PLY10AS8720R7D2 PLY10AS9720R6D2 PLY10AS1130R5D2 PLY10AS2430R4D2 80 0.01 80 0.01 0.1 1 Frequency (MHz) 10 100 15 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 PLY17 Series 1. Integration of choke coil function to suppress differential mode/Low and High Frequency common mode noise. 2. Low Profile (H=<13mm) (3) [(2)] 24.50.5 o1.0 max. s Features 22.50.5 2 s Applications 1. For AC power supply, AC adapter 2. Low profile equipment such as lighting equipment, FPD, Digital Amplifier A/B Type (1) 12.50.5 (4) [(2)] [(3)] 3.50.5 12.50.5 (in mm) o A Type Part Number PLY17BN4912R4A2 PLY17BN9612R0A2 PLY17BN1023R0A2 PLY17BN1121R8A2 PLY17BN1721R5A2 PLY17BN2921R2A2 PLY17BN3721R0A2 PLY17BN5620R8A2 PLY17BN7820R7A2 PLY17BN9320R6A2 Common Mode Inductance (min.) (mH) 0.49 0.96 1.0 1.1 1.7 2.9 3.7 5.6 7.8 9.3 Normal Mode Inductance (min.) (H) 18 36 36 44 67 110 140 210 290 350 Rated Current (A) 2.4 2.0 3.0 1.8 1.5 1.2 1.0 0.8 0.7 0.6 Rated Voltage (Vac) 300 300 300 300 300 300 300 300 300 300 Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25C to 120C Winding Temperature Rise (at Rated Current) (max.): 60K o B Type Part Number PLY17BN4912R4B2 PLY17BN9612R0B2 PLY17BN1023R0B2 PLY17BN1121R8B2 PLY17BN1721R5B2 PLY17BN2921R2B2 PLY17BN3721R0B2 PLY17BN5620R8B2 PLY17BN7820R7B2 PLY17BN9320R6B2 Common Mode Inductance (min.) (mH) 0.49 0.96 1.0 1.1 1.7 2.9 3.7 5.6 7.8 9.3 Normal Mode Inductance (min.) (H) 24 47 47 58 88 140 180 280 390 460 Rated Current (A) 2.4 2.0 3.0 1.8 1.5 1.2 1.0 0.8 0.7 0.6 Rated Voltage (Vac) 300 300 300 300 300 300 300 300 300 300 Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25C to 120C Winding Temperature Rise (at Rated Current) (max.): 60K 16 (4) [(1)] 15.00.5 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 s Equivalent Circuit Diagram s Common Mode Insertion Loss-Frequency Characteristics 0 20 (1) (2) Insertion Loss (dB) PLY17BN9612R0-2 PLY17BN4912R4-2 PLY17BN1023R0-2 40 PLY17BN9320R6-2 PLY17BN7820R7-2 PLY17BN5620R8-2 PLY17BN3721R0-2 60 PLY17BN2921R2-2 PLY17BN1721R5-2 PLY17BN1121R8-2 80 0.01 2 (4) (3) 0.1 1 Frequency (MHz) 10 100 s Differential Mode Insertion Loss-Frequency Characteristics PLY17BN***A2 0 0 PLY17BN***B2 20 Insertion Loss (dB) Insertion Loss (dB) 20 40 60 PLY17BN9320R6A2 PLY17BN7820R7A2 PLY17BN5620R8A2 PLY17BN3721R0A2 PLY17BN2921R2A2 PLY17BN1721R5A2 PLY17BN1121R8A2 PLY17BN9612R0A2 PLY17BN4912R4A2 PLY17BN1023R0A2 40 60 PLY17BN9320R6B2 PLY17BN7820R7B2 PLY17BN5620R8B2 PLY17BN3721R0B2 PLY17BN2921R2B2 PLY17BN1721R5B2 PLY17BN1121R8B2 PLY17BN9612R0B2 PLY17BN4912R4B2 PLY17BN1023R0B2 80 0.01 0.1 1 Frequency (MHz) 10 100 80 0.01 0.1 1 Frequency (MHz) 10 100 17 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 PLY17 Series (Safety Standard Recognized) 1. Integration of choke coil function to suppress differential mode/Low and High Frequency common mode noise. 2. Low Profile (H=<13mm) 3. Safety standards: EN60065 (3) [(2)] 24.50.5 o1.0 max. s Features 22.50.5 2 s Applications 1. For AC power supply, AC adapter 2. Low profile equipment such as lighting equipment, FPD, Digital Amplifier A/B Type 3.50.5 (1) 12.50.5 (4) [(2)] [(3)] 12.50.5 (in mm) o A Type Part Number PLY17BS4912R4A2 PLY17BS9612R0A2 PLY17BS1023R0A2 PLY17BS1121R8A2 PLY17BS1721R5A2 PLY17BS2921R2A2 PLY17BS3721R0A2 PLY17BS5620R8A2 PLY17BS7820R7A2 PLY17BS9320R6A2 Common Mode Inductance (min.) (mH) 0.49 0.96 1.0 1.1 1.7 2.9 3.7 5.6 7.8 9.3 Normal Mode Inductance (min.) (H) 18 36 36 44 67 110 140 210 290 350 Rated Current (A) 2.4 2.0 3.0 1.8 1.5 1.2 1.0 0.8 0.7 0.6 Rated Voltage (Vac) 250 250 250 250 250 250 250 250 250 250 Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25C to 120C Winding Temperature Rise (at Rated Current) (max.): 60K o B Type Part Number PLY17BS4912R4B2 PLY17BS9612R0B2 PLY17BS1023R0B2 PLY17BS1121R8B2 PLY17BS1721R5B2 PLY17BS2921R2B2 PLY17BS3721R0B2 PLY17BS5620R8B2 PLY17BS7820R7B2 PLY17BS9320R6B2 Common Mode Inductance (min.) (mH) 0.49 0.96 1.0 1.1 1.7 2.9 3.7 5.6 7.8 9.3 Normal Mode Inductance (min.) (H) 24 47 47 58 88 140 180 280 390 460 Rated Current (A) 2.4 2.0 3.0 1.8 1.5 1.2 1.0 0.8 0.7 0.6 Rated Voltage (Vac) 250 250 250 250 250 250 250 250 250 250 Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25C to 120C Winding Temperature Rise (at Rated Current) (max.): 60K 18 (4) [(1)] 15.00.5 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 s Equivalent Circuit Diagram s Common Mode Insertion Loss-Frequency Characteristics 0 20 (1) (2) Insertion Loss (dB) PLY17BS9612R0-2 PLY17BS4912R4-2 PLY17BS1023R0-2 40 PLY17BS9320R6-2 PLY17BS7820R7-2 PLY17BS5620R8-2 PLY17BS3721R0-2 60 PLY17BS2921R2-2 PLY17BS1721R5-2 PLY17BS1121R8-2 80 0.01 2 (4) (3) 0.1 1 Frequency (MHz) 10 100 s Differential Mode Insertion Loss-Frequency Characteristics PLY17BS***A2 0 0 PLY17BS***B2 20 Insertion Loss (dB) Insertion Loss (dB) 20 40 60 PLY17BS9320R6A2 PLY17BS7820R7A2 PLY17BS5620R8A2 PLY17BS3721R0A2 PLY17BS2921R2A2 PLY17BS1721R5A2 PLY17BS1121R8A2 PLY17BS9612R0A2 PLY17BS4912R4A2 PLY17BS1023R0A2 40 60 PLY17BS9320R6B2 PLY17BS7820R7B2 PLY17BS5620R8B2 PLY17BS3721R0B2 PLY17BS2921R2B2 PLY17BS1721R5B2 PLY17BS1121R8B2 PLY17BS9612R0B2 PLY17BS4912R4B2 PLY17BS1023R0B2 80 0.01 0.1 1 Frequency (MHz) 10 100 80 0.01 0.1 1 Frequency (MHz) 10 100 19 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 Noise Suppression Effect of PLY10 Series The data shows noise suppression effects comparison PLY10 with existing common mode choke coil. (In AC adaptor of note PC) 2 Common mode choke coil and differentical mode choke coil are used. 0.33F 0.1F 0.33F Hybrid choke coil PLY10 0.1F 24mH 680H 1000pF PLY10A1130R5D 1000pF * Noise Level The filter circuit with hybrid choke coil has suppressed conducted noise as well as conventional filter in spite of its compact composition. Common mode choke coil and differencial mode choke coil are used. 90 80 70 Noise Level (dBV) 60 50 40 30 20 0.5 Noise Level (dBV) 90 80 70 60 50 40 30 20 0.5 Hybrid choke coil PLY10 1 5 10 Frequency (MHz) 30 1 5 10 Frequency (MHz) 30 20 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 !Caution /Notice s !Caution (Rating) 1. Rated Current Operating current should not exceed the rated value. Even if operating current is under the rated value, adequate ventilation is required to avoid excessive heat generated within the product (choke coil) and from surrounding heat sources. If exceeding these conditions, excessive heat may cause fumes or permanent damage to the product. Please ensure that product (choke coil) is evaluated and confirmed against the specification when it is mounted in your final assembled product. -> Winding temperature should be less than 120 degree C. *As for FKOB series winding temperature should be less than 95 degree C. Maximum allowable temperature at the surface of coil (ambient temperature + winding temperature rise) is in accordance with each safety standard applicable to final assembled product. When the temperature at winding exceeds maximum allowable temperature of safety standard, the rated current should be derated. 2. Inrush Current Inrush current should not exceed 10 times rated current within 1/4 cycle of 50/60Hz commercial power line. Inrush current should be limited to a minimum of 10 seconds after last inrush. If these conditions are exceeded, excessive heat may cause fumes or permanent damage to the component, or at worst cause ignition. 2. Cleaning Avoid cleaning product due to non-waterproof construction. 3. Storage and Handling Requirements (1) Storage period Product should be used within 12 months after receiving. Solderability should be checked if this period is exceeded. (2) Storage conditions Storage Temperature: -10 to 40 C Relative humidity: 30 to 70% Avoid sudden changes in temperature and humidity. Don't keep products in corrosive gases such as sulfur, chlorine gas or acid, or it may cause oxidation of lead terminals resulting in poor solderability or corrosion of component windings. (3) Handling conditions Care should be taken when transporting or handling product to avoid excessive vibration or mechanical shock. 2 s Notice (Storage and Operating Condition) 1. Soldering Conditions (1) Flux, Solder * Rosin-based flux should be used. Do not use strong acidic flux with halide content exceeding 0.2wt% (chlorine conversion value) * Use 63/37 solder (Sn/Pb = 63/37) or 60/40 solder (Sn/Pb = 60/40). In case of lead-free solder, use Sn-3.0Ag-0.5Cu solder (2) Flow soldering profile Pre-heating 300 Temperature (C) 250 200 150 100 50 60s min. Soldering time 150C Soldering Gradual cooling (in air) Soldering temperature Standard profile Sn/Pb = 60/40, Sn/Pb = 63/37 Sn-3.0Ag-0.5Cu solder Limit profile Soldering temp. Soldering time Soldering temp. Soldering time Soldering temp. Soldering time Cycle of flow 240-260C 5s max. 2502C 4-6s 2653C 5s 2 times For additional mounting methods, please contact Murata. s Notice (Soldering and Mounting) Magnetic Flux Leakage Choke coils generate small amounts of magnetic flux leakage that may adversely affect equipment operation according to component arrangement. Testing should be completed on final assembly to ensure equipment performance is not affected. s Notice (Rating) Coil Humming Noise Magnetic flux generated between coil and core or between the choke coil windings creates repulsive power between the coil windings. This repulsive power causes the coil winding to vibrate and create a humming noise. The amount of hum produced by the coil is proportionate to the amount of harmonic distortion generated by the operating current. This does not influence the electrical performance of the coils, but it should be considered and tested in actual circuit application. 21 !Note * This PDF catalog is downloadedand !CAUTION (forMurata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our !Note * Please read rating from the website of storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 Packaging s Minimum Quantity Part Number FKOB Minimum Quantity (pcs.) Magazine Package 1800 1800 1800 1920 Box 100 1260 1260 1200 1080 2 PLA10 PLH10 PLY10 PLY17 22 !Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 Note: 1. Export Control For customers outside Japan No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed above 3. Product specifications in this catalog are as of January 2006. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. http://www.murata.com/ Head Office 1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp |
Price & Availability of PLA10AN1522R0A2B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |